Ordering Information
ABF Air Bearing Filtration Kit
Flow Rate (Required)
| Option |
Description |
| -FL1 |
Flow rate up to 23.9 SLPM |
| -FL2 |
Flow rate up to 168.3 SLPM |
Inlet Side (Required)
| Option |
Description |
| -IN1 |
Left side inlet |
| -IN2 |
Right side inlet |
Filtration Type (Required)
| Option |
Description |
| -OT1 |
English one-touch fitting |
| -OT2 |
Metric one-touch fitting |
Pressure Switch (Required)
| Option |
Description |
| -PC1 |
Pressure switch with 26-pin high density D connector |
| -PC2 |
Pressure switch with flying leads |
| -PC3 |
Pressure switch for ML/MP drive with flying leads |
| -PC4 |
Pressure switch for Npaq MR/Epaq MR |
| -PC5 |
Pressure switch for Npaq |
| -PC6 |
Pressure Switch for Automation1-XR3/iXR3 |
| -PC7 |
Pressure Switch for Automation1-iXC2/XC2/iXC2e/XC2e/iXL2e/XL2e |
Cable Length (Required)
| Option |
Description |
| -xx |
Cable length for pressure switch in dm (1 meter = 10 dm)
Minimum length = 10 dm, maximum length = 50 dm |
Breakout Block (Optional)
| Option |
Description |
| -BB1 |
15-pin D breakout, 7.6 dm of cable |
| -BB2 |
25-pin breakout, 9.1 dm of cable |
| -BB3 |
26-pin HD breakout, 7.6 dm of cable |
Power Supply (Optional)
| Option |
Description |
| -PS1 |
Power Supply assembly, 24 VDC 3.2 amp |
Integration (Required)
Aerotech offers both standard and custom integration services to help you get your system fully operational as quickly as possible. The following standard integration options are available for this system. Please consult Aerotech if you are unsure what level of integration is required, or if you desire custom integration support with your system.
| Option |
Description |
| -TAS |
Integration - Test as system
Testing, integration, and documentation of a group of components as a complete system that will be used together (ex: drive, controller, and stage). This includes parameter file generation, system tuning, and documentation of the system configuration. |
| -TAC |
Integration - Test as components
Testing and integration of individual items as discrete components. This is typically used for spare parts, replacement parts, or items that will not be used or shipped together (ex: stage only). These components may or may not be part of a larger system |
